Lumber Formwork The general term lumber refers to both “Dimension lumber” and “Timber”. Dimension lumber means a piece of lumber 38 to 102 mm inclusive in smaller dimension. Timber means a piece of lumber 114 mm or
Read moreLumber Formwork
Category: Construction
Desirable Properties of Plaster
Desirable Properties of Plaster 1-Introduction Portland cement plaster must have certain properties in both the fresh and hardened state to allow proper application and long-term service. A properly mixed plaster can be either hand or
Read morePortland Cement Plaster Materials
1-Introduction Materials should comply with building codes and job specifications. Packaged materials should be labeled properly, indicating the manufacturer, brand name, and recommendations for use. Packaged materials that might be damaged by moisture should be
Read moreConstruction Process of RC Column
Construction Process of RC Column Reinforced Concrete column is a structural member of RC frame structured building. It’s a vertical member which transfers loads from slab and beam directly to subsequent soil. A whole building
Read moreCauses of Formwork Failures
Causes of Formwork Failures Failure of formwork in general results from various causes: excessive loads, premature removal of forms or shores, inadequacies related to formwork, and human error on the job, whether due to indifference,
Read moreTypes of Formwork
In this article named “Types of Formwork”, the different types of formworks are reviewed: foundation, wall, column, beam, ceiling. Types of Formwork Foundation Formwork Foundation formworks can be designed in various ways. Basically there is
Read moreIntroduction to Construction
Construction industry is one of the largest business sectors in the entire world. It has been estimated that about 10% of the percentage of the gross national product was given for construction processes in a few years.
Read moreReinforced Concrete Quantity and Rate Analysis
In order to perform rate analysis for reinforced concrete, two steps are involved: 1- Estimation of number of labour and equipment, quantity of materials, miscellaneous items required for for a certain quantity of reinforced concrete. 2- Determination of structural
Read more