Civil Engineering Forum

Corrosion of Embedded Metals in Concrete

Corrosion of Embedded Metals in Concrete Corrosion of reinforcing steel and other embedded metals is the leading cause of deterioration in concrete. When steel corrodes, the resulting rust occupies a greater volume than the steel.

Causes of Formwork Failures

TeamCivil Construction

Causes of Formwork Failures Failure of formwork in general results from various causes: excessive loads, premature removal of forms or shores, inadequacies related to formwork, and human error on the job, whether due to indifference,

Concrete Repair and Maintenance System

TeamCivil Management, Repair

Concrete repairs have occurred on Reclamation projects since the first concrete was placed in 1903. Unfortunately, even though the best available knowledge and materials were used, many repair failures have occurred during the 112 years

Origin and Classification of Aggregates

TeamCivil Concrete, Materials

Origin and Classification of Aggregates Most of the properties of an aggregate derive from its parental rock chemical and mineral composition which affects strength, stiffness, density, pore structure and permeability. Rocks experience geothermal and weathering

Pervious Concrete

TeamCivil Concrete, Types

Pervious Concrete Pervious concrete is a type of concrete with a system of interconnected pores allowing water to rapidly drain through. Pervious concrete itself is made up of coarse aggregate that is coated by a

Characteristics of High volume Fly Ash Concrete

TeamCivil Concrete, Types

Flyash Flyash is the by-product of the combustion of pulverized coal and is collected by mechanical and electrostatic separators from the fuel gases of power plants where coal is used as a fuel and the

Types of Chemical Admixtures

TeamCivil Concrete, Materials

Admixtures A material other than water, aggregates, or cement that is used as an ingredient of concrete or mortar to control setting and early hardening, workability, or to provide additional cementing properties. Why is admixture

Formwork Materials

TeamCivil Construction

Formwork materials can be classified as: 1. Timber 2. Metals 3. Plastics 1.Timber a. Lumber: Lumber is commonly available material and has excellent strength, weight and cost factor. Lumber is classified as: • Boards: 1